109
12. INPUT/OUTPUT TEST STEPS
12.4.2
Analog Output
The expanded digital/analog interface
Option G1-1 E07 (chapter 12.3)
provides 2 analog outputs.
Analog outputs are working with DC-voltage of 0.0 ... 10.00 V.
Example: The analog output is used for generating of the nominal value
of an AC supply of 0 - 230 V. In this case, the si-unit (V) and the final
value of the AC-voltage (230) must be predefined for the
analog output.
Choose "Analog Outputs - Change".
The display will show all analog outputs.
Choose the analog output for "change".
Fig. 12.12: Chose analog outputs
Fig. 12.13: Chose analog output 1 or 2
Full-electronic G1-1 HV DC-Tester
Summary of Contents for G1-1
Page 38: ...38 4 OPERATING MODES 4 2 2 Normal mode input step Full electronic G1 1 HV DC Tester...
Page 39: ...39 4 OPERATING MODES 4 2 3 Normal mode output step Full electronic G1 1 HV DC Tester...
Page 40: ...40 4 OPERATING MODES 4 2 4 Normal mode time step Full electronic G1 1 HV DC Tester...
Page 133: ...Expires 04 19 2016...
