Edirol DV-7PR, Owner'S Manual

Page: 102 / 120

102
SPECIFICATIONS
❍
Portamento time (Controller Number 5)
Status Second Third
BnH 05H vvH
❍
Main volume (Controller Number 7)
Status Second Third
BnH 07H vvH
❍
Balance (Controller Number 8)
Status Second Third
BnH 08H vvH
❍
Panpot (Controller Number 10)
Status Second Third
BnH 0AH vvH
❍
Expression (Controller Number 11)
Status Second Third
BnH 0BH vvH
❍
Effect control1 (Controller Number 12)
Status Second Third
BnH 0CH vvH
❍
Effect control2 (Controller Number 13)
Status Second Third
BnH 0DH vvH
❍
General-purpose control 1 – 4 (Controller Number 16 – 19)
Status Second Third
BnH 10H – 13H vvH
❍
Hold 1 (Controller Number 64)
Status Second Third
BnH 40H xxH
❍
Portamento (Controller Number 65)
Status Second Third
BnH 41H xxH
❍
Sustenuteo (Controller Number 66)
Status Second Third
BnH 42H xxH
❍
Soft (Controller Number 67)
Status Second Third
BnH 43H xxH
❍
Legato (Controller Number 68)
Status Second Third
BnH 44H xxH
❍
Hold2 (Controller Number 69)
Status Second Third
BnH 45H xxH
❍
Sound Controller 1 – 10 (Controller Number 70 – 79)
Status Second Third
BnH 46 –4FH xxH
❍
General-purpose control 5 – 8 (Controller Number 80 – 83)
Status Second Third
BnH 50 – 53FH vvH
❍
Portamento control (Controller Number 85)
Status Second Third
BnH 54H vvH
❍
Effect depth 2 – 5 (Controller Number 92 –95)
Status Second Third
BnH 5C – 5FH vvH
●
Program Change
Status Second
CnH ppH
pp=Program number: F00H - 1FH (prog.1 - prog.32)j
* Starts playback of the video clip corresponding to the program number.
* From 00H - 1BH (0 - 27) when in the 41-key MIDI Keyboard Mode.
* When the unit receives a unselectable Bank Select message, it is ignored.
●
Channel After Touch
Status Second
DnH vvH
* You can set various controls at the MIDI preferences window.
* For the details of the function that you can set, see the item of the Control Change.
●
Pitch Bend Change
Status Second Third
EnH llH mmH
mm,ll = Pitch bend value: 00 00H - 40 00H - 7F7FH (-8192 - 0 - +8191)
* You can set various controls at the MIDI preferences window.
* For the details of the function that you can set, see the item of the Control Change.
■
Channel Mode Message
●
All Note Off
Status Second Third
BnH 7BH 00H
* Stops the video clip playback. “Keep this clip running“ setting in the “Project” is
ignored.
* The unit receives the message during stop, the unit resets playback program.
●
Reset All Controller
Status Second Third
BnH 79H 00H
* Set the various parameters back to their standard values.
• Playback speed = normal
• Dissolve time = 0
• Volume = 0dB
• Dual Stream Mode = off
1-2. Color Control Section
■
Channel Voice Message
●
Control Change
* You can set various controls at the MIDI preferences window.
* Assignable functions are follows:
• Color Cb control*
• Color Cr control*
• Brightness control*
• VFX control (1 – 4) (VFX 2 – 4 are activate only when the V-4 control is on.)
• Output fade control*
* You can change the polarity of the value.
❍
Modulation (Controller Number 1)
Status Second Third
BnH 01H vvH
❍
Breath type (Controller Number 2)
Status Second Third
BnH 02H vvH
❍
Foot type (Controller Number 4)
Status Second Third
BnH 04H vvH
❍
Portamento time (Controller Number 5)
Status Second Third
BnH 05H vvH
❍
Main volume (Controller Number 7)
Status Second Third
BnH 08H vvH