![background image](http://html1.mh-extra.com/html/eaton/network-card-ms/network-card-ms_user-manual_3779478076.webp)
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
70
Chapter 6
Operation and Maintenance
This chapter explains:
l
Serial cable pinout
l
Detailed serial configuration menus
l
Firmware upgrade instructions
Serial Cable Pinout
Figure 42 shows the serial cable and pinout.
Figure 42. DB-9-to-RJ-45 Serial Cable and Pinout
Serial Configuration Menus
Use the supplied cable to connect the card to a computer.
1.
Connect the card to a computer equipped with an emulator such as HyperTerminal. Set the serial link at
9600 baud
,
8 bits
,
no parity
,
1 stop bit
, and
no flow control
.
2.
Verify that the UPS power is on.
3.
Enter the
admin
password (not modifiable). The Network Card-MS main menu displays (see Figure 43).
Figure 43. Network Card-MS Main Menu
Option 1: Reset
Two options are available for resetting the card (see Figure 44):
l
Hardware Reset:
Equivalent to a restart of the electrical power supply.
l
Restart application:
Restarts only the application.
Female DB-9
Connector
Male RJ-45
Connector
Female DB-9
Connector
Male RJ-45
Connector
Frame
2
3
5
Frame
3
6
4
S
hielded Cable
-------------------------------------------------------------
Eaton Network Card-MS
-------------------------------------------------------------
1 : Reset
2 : Network configuration
3 :
S
et Login Password to Default
4 : Return to Default Configuration
0 : Exit
-------------------------------------------------------------