Eaton Network Card-MS, User Manual

Page: 30 / 89

Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 24
Table 8. Security Levels
Icon Level
Red
Critical
Yellow
W arning
Gray
Unknown
Table 9. UPS Alarms
Alarm On Alarm Off
Battery fuse blown Battery fuse OK
No Battery Battery present
Battery temperature fault Battery temperature OK
Battery charger fault Battery charger OK
Battery fault Battery OK
MAX charger voltage fault Charger voltage OK
MIN charger voltage fault Charger voltage OK
Charger temperature fault Charger temperature OK
Rectifier fault Rectifier OK
Chopper fault Chopper OK
Normal AC frequency out of tolerance Normal AC frequency OK
Normal AC fuses blown Normal AC fuses OK
Normal AC module fault Normal AC module OK
Normal AC voltage out of tolerance Normal AC voltage OK
Normal AC NOK Normal AC OK
Site wiring fault Site wiring OK
Bypass AC frequency out of tolerance Bypass AC frequency OK
Bypass AC phase out of tolerance Bypass AC phase OK
Bypass AC voltage out of tolerance Bypass AC voltage OK
Automatic Bypass fault Automatic Bypass OK
Automatic Bypass overload Automatic Bypass load OK
Automatic Bypass overtemperature Automatic Bypass temperature OK
Automatic Bypass thermal overload Automatic Bypass load OK
Automatic Bypass switch (Q4S) open Automatic Bypass switch (Q4S) closed
Normal AC switch (Q1) open Normal AC switch (Q1) closed
Battery switch (QF1) open Battery switch (QF1) closed
Manual Bypass switch (Q3BP) closed Manual Bypass switch (Q3BP) open
UPS on manual bypass —
Output switch (Q5N) open Output switch (Q5N) closed
Single wave load fault Load OK
Negative DC bus too high Negative DC bus OK