![background image](http://html1.mh-extra.com/html/eaton/network-card-ms/network-card-ms_user-manual_3779478052.webp)
Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
46
l
SNMP Version:
This field allows the user to select the SNMP protocol version: {Disabled, V1, V3 are
supported by the card}.
l
SNMP Community Read-Only:
Provides the SNMPv1 Read community name that identifies a sub-group
attached to a network manager or a logical entity. The card and the clients must share the same community
name to communicate.
l
SNMP Write Enabled:
Enables the SNMP write function.
l
SNMP Community Write:
Displays only if SNMP Write is enabled. The SNMPv1 Write community name
that identifies a sub-group attached to a network manager or a logical entity. The card and the clients must
share the same community name to communicate.
l
Read-Only User:
Identifies the login of the user in the SNMPv3 version, which is authorized to read only
SNMP variables.
l
The Read-Only Security Level:
Selects the security level:
- No Auth No Priv: the user must not use authentication and privacy to access to SNMP variables.
- Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
- Auth Priv: the user must use authentication and privacy to access to SNMP variables.
l
The Read-Only Password:
Allows administrators to specify a new password for the Read-Only User. Its
length must range between 8 and 24 characters and use only letters, numbers, and <>&@#%_=:;,./?|$*()
symbols.
l
Read-Write User:
Identifies the login of the user in the SNMPv3 version, which is authorized to read and
write SNMP variables.
l
The Read-Write Security Level:
Selects the security level:
- No Auth No Priv: the user must not use authentication and privacy to access to SNMP variables.
- Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
- Auth Priv: the user must use authentication and privacy to access to SNMP variables.
l
The Read-Write Password:
Allows administrators to specify a new password for the Read-Write User. Its
length must range between 8 and 24 characters and use only letters, numbers, and <>&@#%_=:;,./?|$*()
symbols.
l
The Notification username:
Allows administrators to specify the “username” field for SNMPv3
notifications. IThis field has to be defined in the applications that recieved those notifications.
l
Save:
Saves any modifications.