![background image](http://html1.mh-extra.com/html/eaton/network-card-ms/network-card-ms_user-manual_3779478051.webp)
Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
45
l
Telnet access:
This parameter enables or disables access to the setting parameters interface using
a Telnet/SSH/CLI connection.
l
Telnet security:
This parameter defines the protocol for access to the setting parameters interface. These
two values are exclusive.
l
TELNET:
The data are read or written using an unsecure access.
l
SSH:
The data are read or written using a secure access.
l
Console interface:
This parameter defines the method for accessing the setting parameters. The two
values are exclusive. The selected HMI is available for the TCP/IP connection (RS232 not concerned) and for
the two protocols (Telnet, SSH). The new value will be taken into account after a manual reset of the NMC.
-
MENU:
The human machine interface (HMI) is a menu interface. The parameters are accessible using
pre-defined menus.
-
CLI:
The CLI provided access to the parameters. The parameters are exclusive to each other.
l
Save:
Saves any modifications.
SNMP Settings
Select SNMP from the menu bar. To access this page, the login and password are systematically requested if
they have not already been entered. This menu enables configuration of the SNMP security parameters (see
Figure 36).
Figure 36. SNMP Settings Page