Using the Telnet/SSH/CLI Interface
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
58
System Commands
Use system commands to customize the information about the UPS (see Table 17).
Table 17. System Commands
getSystem
Syntax
getSystem [option1] [option2] . . .
Options
Contact | Location | upsCustomName | Language
Example
#> getSystem Location
setSystem
Syntax
setSystem [option1] [option2] . . .
Options
Contact = “xx..xx”
Location = “xx..xx”
upsCustomName = “xx..xx”
Language = AUTO | FRE | ENG | SPA | GER | ITA | CHI | JPN | KOR | CZI | RUS
Example
#> setSystem Location=“my office“
getHistSyst
Syntax
getHistSyst [option]
Options
Interval
Example
#> getHistSyst Interval
setHistSys
Syntax
setHistSyst [option]
Options
Interval = xx(10 to 2147483647 in seconds)
Example
#> setHistSyst Interval=12
