![background image](http://html1.mh-extra.com/html/eaton/network-card-ms/network-card-ms_user-manual_3779478031.webp)
Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
25
Positive DC bus too high
Positive DC bus OK
Negative DC bus too low
Negative DC bus OK
Positive DC bus too low
Positive DC bus OK
Inverter limitation
Inverter end of limitation
Inverter fuses blown
Input fuses OK
Inverter fault
Inverter OK
Inverter overload
Inverter load OK
Inverter over temperature
Inverter temperature OK
Inverter short circuit
Inverter OK
Inverter thermal overload
Inverter load OK
Load not protected
On Automatic Bypass
Load protected
Return from Bypass
Load short circuit
Load OK
Load not powered
Load powered
Protection Lost
Protection OK
Emergency button ON
Emergency button OFF
Fan fault
Fan OK
Redundancy Lost
Redundancy OK
Low battery
Battery OK
UPS communication failed
UPS communication restored
UPS data base not available
UPS data base OK
UPS on battery
UPS on normal AC
UPS internal fault
UPS OK
UPS overload
UPS returns to normal load
UPS overtemperature
UPS temperature OK
Imminent UPS shutoff
UPS OK
<Sensor name>:
Temperature is above high threshold xx
°
C
<Sensor name>:
Temperature is below high threshold xx
°
C
<Sensor name>:
Humidity is above high threshold xx %
<Sensor name>:
Humidity is below high threshold xx %
<Sensor name>:
Temperature is below low threshold xx
°
C
<Sensor name>:
Temperature is above low threshold xx
°
C
<Sensor name>:
Humidity is below low threshold xx %
<Sensor name>:
Humidity is above low threshold xx %
<Sensor name>:
<Input #1 label> <when closed label>
<Sensor name>:
<Input #1 label> <when closed label>
<Sensor name>:
<Input #1 label> <when open label>
<Sensor name>:
<Input #1 label> <when open label>
<Sensor name>:
<Input #2 label> <when closed label>
<Sensor name>:
<Input #2 label> <when closed label>
<Sensor name>:
<Input #2 label> <when opem label>
<Sensor name>:
<Input #2 label> <when open label>
Table 9. UPS Alarms
Alarm On
Alarm Off