![background image](http://html1.mh-extra.com/html/eaton/network-card-ms/network-card-ms_user-manual_3779478035.webp)
Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
29
Shutdown Parameters
Select
Shutdown Parameters
from the menu bar to view and configure UPS operating parameters in battery
mode and for power restoration (see Figure 23).
Figure 23. Shutdown Parameters Page (Advanced Parameters Shown)
Click
Show advanced parameters
to display additional parameters for adjusting specific thresholds related to the
percentage of remaining battery charge level.
The Output column allows you to name each receptacle (maximum 20 characters).
Since priority is given to the main receptacle, the card cannot supply power to the load segments when the
main receptacle power is off.
NOTE
For security purposes, the administrator must click
Save
and enter the admin user
name and password to save modifications or run commands. The default user name
and password are both
admin
.