Eaton Moeller SmartWire-Darwin EU5C-SWD-CAN, Hardware And Engineering

Page: 87 / 108

Object list
83
02/09 AWB2723-1612en
At present only the SWD baud rate 125 kbaud (setting 4) is
supported. A change to this setting is rejected with an error
message.
Compatibility rule (0x2001)
Content
General compatibility setting. This defines whether the
replacement of a SWD slave by a compatible slave is
allowed.
• 0 = replacement allowed
• 1 = replacement not allowed (default setting)
Read access
Delivers back the current compatibility setting.
Write access
Definition of the desired compatibility behaviour
(0 or 1)
Presence of slave devices (0x2002)
Content
This global entry defines how the SWD network behaves, if
no slave is found.
• 0 = it is individually settable for each SWD slave whether
it will be treated as an “optional” or “necessary” slave
(default setting).
• 1 = all SWD slaves are treated as “optional” slaves.
Read access
Delivers back the currently valid setting.
Write access
Definition of the desired behaviour.
Configuration comparison mandatory (0x2003)
Content
Via this entry it can be defined whether the SWD gateway is
allowed to start without the performance of a comparison
between the target configuration and the project
configuration.