Eaton EDR 3000, Installation, Operation And Maintenance Manual

Page: 730 / 770

EDR-3000 IM02602003E
Name Description
ExP[4].Trip Signal: Trip
ExP[4].TripCmd Signal: Trip Command
ExP[4].ExBlo1-I Module Input State: External Blocking1
ExP[4].ExBlo2-I Module Input State: External Blocking2
ExP[4].ExBlo TripCmd-I Module Input State: External Blocking of the Trip Command
ExP[4].Alarm-I Module Input State: Alarm
ExP[4].Trip-I Module Input State: Trip
BF.Active Signal: Active
BF.ExBlo Signal: External Blocking
BF.Waiting for Trigger Waiting for Trigger
BF.Pickup Signal: BF-Module Started (Pickup)
BF.Trip Signal: Breaker Failure Trip
BF.Lockout Signal: Lockout
BF.Res Lockout Signal: Reset Lockout
BF.ExBlo1-I Module Input State: External Blocking1
BF.ExBlo2-I Module Input State: External Blocking2
BF.Trigger1-I Module Input: Trigger that will start the BF
BF.Trigger2-I Module Input: Trigger that will start the BF
BF.Trigger3-I Module Input: Trigger that will start the BF
TCM.Active Signal: Active
TCM.ExBlo Signal: External Blocking
TCM.Pickup Signal: Pickup Trip Circuit Supervision
TCM.Not Possible Not possible because no state indicator assigned to the breaker.
TCM.CinBkr-52a-I Module Input State: Feed-back signal of the Bkr (52a)
TCM.CinBkr-52b-I Module Input State: Feed-back signal of the Bkr. (52b)
TCM.ExBlo1-I Module Input State: External Blocking1
TCM.ExBlo2-I Module Input State: External Blocking2
CTS.Active Signal: Active
CTS.ExBlo Signal: External Blocking
CTS.Pickup Signal: Pickup Current Transformer Measuring Circuit Supervision
CTS.ExBlo1-I Module Input State: External Blocking1
CTS.ExBlo2-I Module Input State: External Blocking2
AR.Active Signal: Active
AR.ExBlo Signal: External Blocking
AR.Standby Signal: Standby
AR.t-Man Close Blo Signal: AR blocked after breaker was switched on manually. This timer will be started if the breaker was
switched on manually. While this timer is running, AR cannot be started.
www.eaton.com 718