Eaton EDR 3000 Installation, Operation And Maintenance Manual Download Page 227

Page: 227 / 770

EDR-3000

IM02602003E

Read Out of W

aveform

Records

Within the

Operation/Waveform rec« menu, the User can:

•

Detect the accumulated

waveform

records.

Within the »Operation/Recorders/Man Trigger« menu, the User can trigger the

waveform

recorder manually.

To Read Out the W

aveform

Recorder with PowerPort-E

PowerPort-E

is not running, please start the application.

If the device data have not been loaded, click

»Receive Data From The Device«

in the

»Device« menu.

Double click the

»Operation«

icon in the navigation tree.

Double click the »Recorders« icon in the navigation tree.

Double click the »Waveform rec« icon.

In the window, the

waveform

records are shown in tabular form.

A pop-up will appear by double clicking on a

waveform

record. Choose a folder where the

waveform

record is to be

saved.

The User can analyze the

waveform

records by means of the optionally available

Quality Manager

by clicking on

»Yes« when asked “Shall the received

waveform

record be opened by th

Quality Manager?"

www.eaton.com

215

Summary of Contents for EDR 3000



































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDR 3000

Reviews:

Related manuals for EDR 3000

Brands by name

Popular brands

Eaton EDR 3000, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for EDR 3000

Reviews:

Related manuals for EDR 3000

Brands by name

Popular brands