DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 81 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 79
5.5.3 Copying the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to copy an existing sewing program:
1. Select a sewing program (

p. 56 ).
2. Tap the P
COPY
button.

The sewing program is copied and saved in the next free
program slot. An appropriate message is displayed.
5.5.4 Deleting the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to delete an existing sewing program:
1. Select a sewing program (

p. 56 ).
2. Tap the P
DEL
button.

A message is displayed asking whether you really wish to
delete the active sewing program.
3. Confirm deletion with a tap on the Yes button.

The sewing program is deleted. An appropriate message is
displayed.
5.5.5 Length correction (LENGTH CORRECTION)
All the sewing steps are graded with the same factor.
In some cases, the preset gradation is not suitable.
You can use the length correction to achieve these local
adjustments.
Parameter Meaning Value range
Thread Tension at Hook Looper thread tension 1 – 99
Maximum Speed Maximum speed 100 – 4000