DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 65 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 63
5.5 Operating mode EDIT
Fig. 35: Operating mode EDIT
Header (1)
Operating mode EDIT is displayed. The buttons TF on / TF off
are used to switch the tape feed on / off (610-10 only) or to display
if sewing takes place with or without tape.
Left pane (2)
The graphical representation of the entire seam, divided into the
number of programmed sewing steps, is displayed here.
Middle pane (3)
Existing sewing programs can be edited here (

p. 64 ).
The number and the name of the selected sewing program are
displayed, together with the symbols for all the parameters that
can be set. The gray fields above the parameter symbols show
the respective current values.
③ ② ④
①