DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 104 / 148

Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 102
Fig. 60: Adjusting the pedal
Inclination of the pedal
The pedal (2) should be tilted to a degree that allows the operator
to move the pedal forward and backward without a problem.
You set the inclination of the pedal as follows:
1. Loosen the screw (3).
2. Adjust pedal (2) accordingly.
3. Re-tighten the screw (3).
Position of the pedal
The pedal (2) is attached to the cross strut of the stand. You can
adjust the position of the pedal individually by shifting the position
of the cross strut.
You set the position of the pedal as follows:
1. Loosen the screw with wing nut (1) on both sides of the stand.
2. Slide the cross strut that holds the pedal (2) forward or
backward.
3. Tighten the screw with wing nut (1) on both sides of the stand.
(1) - Wing nut
(2) - Pedal (3) - Screw
③
②
①