DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 31 / 148

Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 29
To thread the reinforcement tape:
1. Place the reel of reinforcement tape (1) onto the reel holder (2)
and lock it in place using the counter bearing (3).
While doing so, make sure the counter bearing (3) is pressed
against the reel of reinforcement tape (1).
Fig. 12: Threading the reinforcement tape (2)
2. Insert the reinforcement tape through the guide (4).
3. Feed the tape between transport roller (5) and spring-loaded
pressure roller (8).
4. Feed the tape through underneath the sensor transducer (6).
5. Insert the reinforcement tape through the guide (7).
(4) - Guide
(5) - Transport roller
(6) - Sensor transducer (7) - Guide
(8) - Pressure roller
⑤
④
⑧
⑦
⑥