DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 61 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 59
To set the fullness:
1. Select the type of fullness.

The type of fullness selected is displayed in an activated
control field within the symbol.
2. If a higher or lower degree of fullness is required, use the
arrows to display more buttons.
3. Input the fullness using the buttons 0 to 16 .
Information
The fullness value remains active until the next sewing step.
Mode AUTO Correcting the fullness value
You can adapt the entire fullness of a sewing program quickly to
the sewing material to be processed. You can correct the fullness
value using either the buttons
+ F% and - F% or the fullness
correction parameter.
Fig. 32: Correcting the fullness value
To correct the fullness value:
1. Input the correction value for the fullness in %.
Information for inputting numeric values:

p. 49 .