DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 72 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 70
Proceed as follows to create a new sewing program:
1. Tap the P
NEW
button.

The PROGRAMMING user interface is displayed.
Pressing the P button displays the number of the next free
program slot.
Fig. 40: Creating a new sewing program (1)
2. Tap <No Name> and input a name.
Information for inputting text:

p. 46 .
Information
If no name is input for the sewing program,
<No Name>
continues
to be displayed.

The left pane displays the 1
st
sewing step with its number.
3. Set the sewing material size (

p. 65 ).
4. Set all parameters for the 1
st
sewing step.
5. Use the buttons TF on and TF off to specify if the tape feed
is turned on or off during this sewing step (610-10 only).