DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 24 / 148

Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 22
Fig. 3: Inserting and replacing the needle
To change the needle:
1. Turn the handwheel until the needle bar (1) reaches the upper
end position.
2. Loosen the screw (3).
3. Pull the needle out towards the bottom.
4. Insert the new needle.
Important
Align the needle in such a way that the groove (2) is pointing
to the rear.
5. Tighten the screw (3).
(1) - Needle bar
(2) - Groove (3) - Screw
①
③
②