DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 83 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 81
Fig. 48: Length correction (2)
4. Do the same with all further sewing steps.
5. After the last sewing step tap the END button.

This closes the length correction, and the operating
mode
EDIT (

p. 63 ) opens.
5.6 Displaying software version
To display the software version:
1. Switch the machine off and on (

p. 20 ).

The following appears on the display:
• On the left, the class
• On the right, the firmware

The machine performs a reference run.

The controller starts in the operating mode that was active
when it was switched off -
MAN or AUTO .
5.7 Operating mode SERVICE
More information on the contents of Service mode can be found
in the

Service Instructions .