DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 66 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 64
Right pane (4)
Here, sewing programs can be created(

p. 69 ), deleted
(

p. 79 ), copied (

p. 79 ) and optimized (

p. 79 ).
5.5.1 Parameters that can be set
The following table lists the parameters that can be set in EDIT
operating mode.
Symbols/buttons Meaning
Changing the program name
There is only one display in EDIT operating
mode. A new sewing program is automati-
cally assigned the next free program slot.
Select the right or left piece to be sewn
Set the sewing material size,

p. 65
Other program parameters in operating
mode
EDIT ,

p. 60
Temporarily setting the fullness value until
the next sewing step,

p. 58
Setting the needle thread tension