DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 58 / 148

Settings via software
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 56
To set a parameter:
1. Tap the desired button.

The user interface for setting the desired parameter is
displayed.
For some parameters the setting is more than just a numerical
value. These more complex parameters are described in detail
below.
Mode AUTO Selecting the sewing program
Fig. 29: Selecting the sewing program
To select a sewing program:
1. Tap the desired sewing program.

The selected sewing program is displayed in an activated
control field within the line.
Setting the stitch length in mm.
If changed in
AUTO operating mode, the
value is permanently saved in the sewing
program.
Symbols/buttons Meaning