S e c t i o n 2 . 3 : C ha ng i ng O t he r N T 9 0 1 0 Fu n c t i o n s
4 1
1. If an event’s reporting code is programmed as [00], the system will not attempt to
call the central station.
2. If the reporting code for an event is programmed as anything from [01] to [FF], the
system will automatically generate the zone or access code number. See Appendix A
for a list of the codes which will be transmitted.
If the
Contact ID uses Programmed Reporting Codes
option is enabled, the system
will operate as follows:
1. If an event’s reporting code is programmed as [00] or [FF], the system will not
attempt to call central station.
2. If the reporting code for an event is programmed as anything from [01] to [FE], the
system will send the programmed reporting code.
Additional Notes on Contact ID
1. Account numbers must be four digits.
2. If the digit ‘0’ is in the account number substitute the HEX digit ‘A’ for the ‘0’.
3. All reporting codes must be two digits.
4. If the digit ‘0’ is in the reporting code substitute the HEX digit ‘A’ for the ‘0’.
5. To prevent the system from reporting an event program the reporting code for the
event as [00] or [FF].
Communicator Format Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [360]
Contact ID Sends Automatic Reporting Codes. . . . . . . . . .Section [381], Option [7]
SIA (Level 2)
SIA is a specialized format that will communicate information quickly using frequency shift
keying (FSK) rather than pulses. The SIA format will automatically generate the type of sig-
nal being transmitted, such as Burglary, Fire, Panic etc. The two digit reporting code is used
to identify the zone or access code number.
If the SIA format is selected the system can be programmed to automatically generate all
zone and access code numbers eliminating the need to program these items.
If the
SIA Sends Automatic Reporting Codes
option is enabled the system will operate
as follows:
1. If the reporting code for an event is programmed as [00] the system will not attempt
to call the central station.
2. If the reporting code for an event is programmed as anything from [01] to [FF] the
system will AUTOMATICALLY generate the zone or access code number.
3. Bypassed zones will always be identified when partial closing of the system occurs.
The Communicator Call Direction Options can be used to disable reporting of events such
as Openings/Closings. Also, if all the Opening/Closing reporting codes were programmed
as [00] the system would not report.
If the
SIA Sends Automatic Reporting Codes
option is disabled the system will operate
as follows:
1. If the reporting code for an event is programmed as [00] or [FF] the system will not
attempt to call central station.