1 5
Chapter 2: Advanced Programming
Section 2.1: Programming the NT9010
The chapter describes how to use advanced programming. For instructions on using Flash Programming, please see
Chapter 1: Quick Set Up Guide
.
2.1.1 How to Enter
Advanced
Programming
You can use the Advanced Programming to set all communicator and system options. The
Installer Code
is [5555] at default, but should be changed to prevent unauthorized access
to programming.
Step 1:
From any keypad enter [
✱
][8][Installer Code].
• The System light will flash and the Armed light will turn on to indicate you are in
programming
• The NT9010 will announce “To use Flash Programming press 1. To bypass Flash Pro-
gramming press 2.”
Step 2:
To skip Flash Programming and go to the advanced programming sections, press
[2].
Step 3:
Enter the 3-digit section number you want to program.
• The Armed light will turn off and the Ready light will turn on to indicate the system
is ready for the information for the selected section
• You can use the Forward (Playback) button to go forward through the advanced pro-
gramming data. The Backward (Record) button will not work in the advanced pro-
gramming sections, except for sections [301] to [303], and [402].
Step 4:
Sections [802], [804], or [807] have 2- or 3-digit sub-sections. To access program-
ming in these sections enter the programming sub-section number.
NOTE:
If the section number entered is not valid, the NT9010 will sound an
error tone and say the section number that was entered.
Installer Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [006]
2.1.2 Programming
Decimal Data
When the Ready light is ON the NT9010 is waiting for the information to be programmed
for the selected section.
If a digit is entered for each program box in a section the system will automatically exit from
the section. It will turn OFF the Ready light and turn the Armed light back ON.
You can also press the [#] key to exit a section before entering data for every box. This is
handy if you only need to change the first few program boxes. All other locations in the
section will remain unchanged. If the [#] key is pressed the system will turn OFF the Ready
light, turn ON the Armed light and exit from the section.
You can use also the Forward (Playback) button to go forwards through the programming
data. The Backward (Record) button will not work in the advanced programming sections
(except for sections [301] to [303], and section [402]).