Operating Manual
© Dürr Systems AG
132 / 156
EcoBell2 SL EC - Rotating Atomizer with External Charging
Faults
Document No.: MRA00001EN
Version:: 07
•
As of:: 01/2020
• Apply the assembly tool flush on the paint pipe.
Fig. 86: Applying the assembly tool to the paint pipe
1
Assembly tool
2
Paint tube
• Grease the sealing lip of the needle seal lightly using special
grease.
• Push needle seal carefully on the assembly tool with the sealing lip
outwards.
Fig. 87: Applying the needle seal
1
Assembly tool
2
Paint pipe
3
Needle seal
4
Sealing lip
• Carefully put the needle seat in the correct position on the
assembly tool. Note the position of the dowel on the needle seat.
• Lightly grease the needle seat outside with special grease, at the
marked locations.
Fig. 88: Pushing up needle seat
1
Assembly tool
2
Paint pipe
3
Needle seat
4
Lightly lubricate with special grease
• Paint the threads on the paint tube with screw lock.
