Operating Manual
© Dürr Systems AG
EcoBell2 SL EC - Rotating Atomizer with External Charging
Installation and assembly
Document No.: MRA00001EN
Version:: 07
•
As of:: 01/2020
61 / 156
Fig. 26: Inserting assembly tools in the electrode ring
1
Clamping screw
2
Mark (arrow)
• Insert assembly tool in the electrode ring.
The mark (2) on the tool must be aligned with the mount on the
connecting flange. The hexagon socket key simplifies orientation.
• Tighten the clamping screw (1) of the electrode ring.
The tool and thus the electrode ring are pressed against the
connecting flange and centered. The excess petroleum jelly
escapes from the gap between connecting flange and electrode
ring.
A T T E N T I O N
Risk of damage to property and production disruption
The plastic thread can be damaged easily.
Apply only the specified tightening torque.
