Operating Manual
© Dürr Systems AG
62 / 156
EcoBell2 SL EC - Rotating Atomizer with External Charging
Installation and assembly
Document No.: MRA00001EN
Version:: 07
•
As of:: 01/2020
Fig. 27: Screw on the electrode ring
1
Plastic screws
• Tighten the three plastic screws (1) on the connecting flange with
0.5 Nm.
In the tool, there are gaps for the screws.
• Release the clamping screw.
• Remove the tool from the electrode ring.
• Wipe off superfluous petroleum jelly.
C A U T I O N
Sharp tip of the electrode
You could suffer superficial skin injuries.
Touch electrode finger only at the side of the housing and do not
touch the needle tip. Wear safety gloves.
Fig. 28: Screwing in the electrode fingers
• Screw in the six electrode fingers hand tight in the electrode ring.
