Docomo SH-05A, Instruction Manual

Page: 392 / 556

390
e19_dr20_7e.fm
[390/404]
Ne
twork Serv
ice
s
Voice Mail Service is a service for answering incoming voice/
Videophone calls with Replay message and recording callers’
messages when the handset is outside the service area or turned
off, or when calls cannot be answered.
To prioritize Voice Mail Service when Record message (
n
P. 68) is also
set, set the ringing time for Voice Mail Service shorter than the answering
duration for Record message.
If a voice/Videophone call is not answered when Voice Mail Service is set
to “Activate”, the call is saved as “Missed calls” in “Received calls” and
the stock icon [
B
] (missed call) appears in stand-by.
STEP 1 Activate Voice Mail Service.
STEP 2 Voice/Videophone call is received.
STEP 3 Call is connected to Voice Mail Service center if not answered.
STEP 4 Caller records a message.
STEP 5 Play message.
1
In the Custom menu, select [Settings]
/
[NW
Services]
/
[Voice Mail].
2
Select the service.
;
Select [Check messages].
;
Select [Play Messages]
/
[Play(voice call)]/[Play(videophone)]
/
[Yes]
/
operate according to the voice guidance.
;
Select [Activate VoiceMail]
/
[Activate VoiceMail]
/
[Yes].
;
Select [Activate VoiceMail]
/
[Ring time+start]
/
enter the
ringing time
/ t /
[Yes].
• Set the ringing time before activating Voice Mail Service.
;
Select [Set ring time]
/
enter the ringing time
/ t
.
;
Select [Deactivate VoiceMail]
/
[Yes].
;
Select [Check setting].
;
Select [Voice Mail setting]
/
[Setting(voice call)]/
[Setting(videophone)]
/
[Yes]
/
operate according to the voice
guidance.
;
Select [Notification setting]
/
[Voice Mail alarm]
/
select the
setting
/ t
.
• Set to notify with ring tone when a new message is stored.
Voice Mail Service
Using Voice Mail Service
Record up to 20 messages respectively for voice and Videophone calls
with approximately 3 minutes of recording time per message.
Messages are saved for up to approximately 72 hours.
When a call is received with Voice Mail Service set to “Activate”, the
ring tone sounds for the set ringing time (can be changed:
n
P. 390).
Answering during the set ringing time connects calls. Calls are
automatically connected to Voice Mail Service center after set time.
Connected calls are noted in stand-by and Received calls. However,
when ringing time is set to “0 seconds”, calls are not saved in Received
calls.
If a Videophone call is received when Voice Mail Service is set to
“Activate”, the call is connected to Voice Mail Service and recording
message is activated after the set ringing time passes. Answering
during the set ringing time connects calls without connecting to Voice
Mail Service.
When a call is connected to Voice Mail Service with Chara-den, the
DTMF operations become unavailable. Switch the DTMF mode to [ON]
from the Submenu (
n
P. 54).
When the 2in1 mode is set to [Dual mode], select [Number A] or
[Number B] to activate/deactivate Voice Mail Service, play messages or
set Voice Mail Service.
Call Forwarding Service is set to “Activate”, Voice Mail Service is
stopped automatically.
Basic flow
Using a service
dr20_E.book 390 ページ ２００９年５月１４日 木曜日 午前１０時１７分