Docomo SH-05A, Instruction Manual

Page: 63 / 556

e03_dr20_7e.fm
[61/74]
61
Continued on next page
Vo
ic
e/Vi
d
eop
ho
ne
C
all
s
■ Entering + to make an international call
When making an international call from Japan, enter + before dialing the
overseas number to automatically place the international call access code.
Press
0
for 1+ seconds to enter + .
1
In stand-by, press
0
(for 1+ seconds)
/
enter the
country code, area code (city code) and other party’s
phone number
/ s
.
:
The number with the international call access code, which is
converted from
+ , appears.
2
Select [Call].
:
Select [Original number] to make an international call using the
entered number without converting to the international call access
code.
■ Selecting an international call access code to make an
international call
<International Call>
Enter only the country code, area code (city code) and the phone number,
then select the international call access code set in IDD prefix setting to
make international calls.
1
In stand-by, enter the country code, area code (city
code) and other party’s phone number
/ C
.
2
Select [Add prefix setting]
/
[International Call].
3
Select the international call access code
/ t / s
.
Set whether to automatically place the international call access code by
entering
+ . In addition, set whether to automatically convert the first 0 in the
phone number to the country code when making an international call
overseas.
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[Other settings]
/
[Int’l dial assist]
/
[Auto
conversion].
2
Select the [Int’l prefix conv] field
/ t /
[ON].
:
Set international call access codes as auto prefix in the IDD prefix
setting.
3
Select the [Country code conv] field
/ t /
[ON]
/
select the country to add
/ t
.
: Select from among country codes saved in the Set country code.
4
Press
i
.
Save up to ten international call access codes used when international
calls are made from Japan.
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[Other settings]
/
[Int’l dial assist]
/
[IDD
prefix setting].
2
Select a number to save as a new entry
/ t
.
:
To change a saved number: Select a number
/ t /
[Change].
:
To delete a saved number: Select a number
/ t /
[Delete]
/
[Yes].
The caller ID may not be notified or displayed correctly depending on
the telecommunications carrier, even if Notify caller ID setting
(
n
P. 50) is set to “Send ID”. In this case, making a call from Received
calls is not available.
Int’l dial assist
Setting an international call
Automatically adding an international call
access code/country code
<Auto conversion>
Setting numbers other than WORLD CALL
<IDD prefix setting>
dr20_E.book 61 ページ ２００９年５月１４日 木曜日 午前１０時１７分