Docomo SH-05A, Instruction Manual

Page: 550 / 556

33
Manual for PC Connection_DR20.fm
■
Command name: +CGEQREQ=[parameter]
Overview
Sets QoS (Quality of Service) required of the
network when establishing PPP packet
transmission.
Not stored in FOMA terminal’s memory with
AT&W commands. Not reset with AT&F or ATZ
commands.
Syntax
AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum
bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum
SDU size>]]]]]
o
Parameter description
This setting is assigned to each cid by default
value.
<cid>
*
: 1 to 10
<Traffic class>
*
: 2 or 3
2: interactive (initial setting)
3: background
<Maximum bitrate UL>
*
: None (initial setting) or
64 to 384
<Maximum bitrate DL>
*
: None (initial setting) or
64 to 7232
However, even if the values of [Maximum bitrate
UL] and [Maximum bitrate DL] are permitted level,
they may be set to the values whose fractions
were discarded.
<Maximum SDU size>
*
When <PDP_type> is PPP: 10 to 1500 or 1502
(initial setting)
When <PDP_type> is IP: 10 to 1500 (initial
setting)
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal.
Execution examples
Setting (1) is set to each cid as initial setting.
(1) Command when requesting connection
without setting uplink/downlink speeds (for
<cid>=2, Traffic class=2)
AT+CGEQREQ=2
OK
(2) Command when requesting connection at
uplink speeds of 384 kbps, downlink speeds
of 7,232 kbps, and maximum permitting SDU
size 1500 (for <cid>=3, Traffic class=2)
AT+CGEQREQ=3,2,384,7232,,,,1500
OK
(3) Command when requesting connection
without setting uplink speeds of 384 kbps or
downlink speeds (for <cid>=4, Traffic class=2)
AT+CGEQREQ=4,2,384
OK
(4) Command when requesting connection at
downlink speeds of 7,232 kbps without setting
uplink speeds (for <cid>=5, Traffic class=2)
AT+CGEQREQ=5,2,,7232
OK
Operation when parameter is abbreviated
AT+CGEQREQ=
Returns all <cid> settings to default settings.
AT+CGEQREQ=<cid>
Returns specified <cid> setting to default setting.
AT+CGEQREQ=?
Displays list of values that can be set.
AT+CGEQREQ?
Displays current settings.
Manual for PC Connection_DR20.fm 33 ページ ２００９年５月１４日 木曜日 午前１０時５２分