Docomo SH-05A, Instruction Manual

Page: 303 / 556

e15_dr20_7e.fm
[301/304]
301
Continued on next page
Map
/GPS Fu
ncti
on
Notify the positioned Location information of the present location
to specified service clients (information provider supporting
Location notification).
For Location notification function, subscription to an information provider
supporting Location notification and a service usage fee may be
required.
Sent location information may not reach an information provider
depending on the signal strength.
Using Location notification is charged.
1
In the Custom menu, select [LifeKit]
/
[Map/GPS]
/
[Loc.notification/set]
/
[Location notification].
2
Select the service client.
; Select [Select from list] / select a service client / t .
; Select [Direct input] / enter the service client ID / t .
:
To cancel positioning location: Press
i / t
.
• Positioning may not be canceled or the location information may be
sent depending on timing.
■ Setting Positioning mode of Location notification
<Positioning mode>
1
In the Custom menu, select [LifeKit]
/
[Map/GPS]
/
[Loc.notification/set]
/
[Positioning mode].
2
Select the Positioning mode
/ t /
[OK].
Save up to five service clients to notify the present location.
1
In the Custom menu, select [LifeKit]
/
[Map/GPS]
/
[Loc.notification/set]
/
[Notification clients].
2
Press
C /
[Save new].
:
Alternatively, press
i
.
3
Select [Name]
/
enter a service client name
/ t
.
:
Enter up to 32 single-byte (16 double-byte) characters.
4
Select [ID]
/
enter the service client ID
/ t
.
:
Enter ID specified by a GPS information provider.
:
Enter up to 12 single-byte numeric characters.
b
and # are also
available to enter.
When the 2in1 service is used, only Number A is available regardless of
the mode. If the location information provision is requested with
Number B, the location information is not provided, and the failure of
search is notified to the other party.
When the location information is requested from the other party
who used imadocokantan search
A confirmation screen for location provision appears at every request.
Select [Yes] to immediately notify to a rough positioning result to the
other party.
After [Yes] is selected, the GPS positioning screen appears, and a
high-accuracy positioning result is notified.
If the location provision is canceled after [Yes] is selected on a
confirmation screen for location provision, a rough positioning result is
notified to the other party. In this case, the location history is recorded,
but the location information does not appear.
When the location information is requested while in Public
mode (Drive mode)
If Location provision is set to [ 許可 ] for usage settings of each service, a
confirmation screen for location provision is displayed, the GPS
positioning screen appears, and the location is provided after GPS
positioning. However, Location provision/accept, Location provision/
notify, vibrator or called LED does not operate.
When Location provision is set to [
毎回確認
] for usage settings of each
service, location information is not provided.
Location notification
Notifying present location information
Change sound/volume/LED color for Location notification (
n
P. 87,
P. 100).
When the 2in1 service is used, the location information is notified with
Number A regardless of the mode.
Saving service clients
<Notification clients>
dr20_E.book 301 ページ ２００９年５月１４日 木曜日 午前１０時１７分