Docomo SH-05A, Instruction Manual

Page: 200 / 556

198
e10_dr20_7e.fm
[198/220]
Cam
era
Fingerprints or oil on the lens may cause the image to be out of focus. In
addition, images may blur and rays of light may appear in images when
shot near a strong light source. Wipe the lens with a soft cloth before
shooting images.
Shoot when battery level is sufficient. Images may appear dark and
distorted when shot with insufficient battery power even while the
handset is charging. Do not shoot images while charging.
Although the cameras are made with high-precision technology, some
pixels or lines look constantly dark or bright. Further, white lines and
other noise may appear in images especially when shooting images in
dimly lit surroundings.
The quality of images may deteriorate when shot or saved after the
FOMA terminal has been left in a warm location for a long time.
If the camera lens is exposed to direct sunlight for a long time, the
internal color filter may discolor, creating a discoloration of shot images.
Images shot in shooting conditions which include the sun, a light or other
strong light source may appear dark and distorted.
Direct images shot of the sun may damage the performance of the CCD.
The FOMA terminal may become warm after shooting still pictures
continuously, shooting long moving pictures, or activating the camera for
a long time. This is not a malfunction.
When the AF mode is switched, sounds may be heard from the camera
lens. This is not a malfunction.
The camera lens has built-in the mechanical shutter and ND filter on its
front side.
The FOMA terminal may sound when using the camera. This is not a
malfunction.
The front side of camera lens may be closed when the camera is not
used. This is not a malfunction.
Images are blurred when the FOMA terminal moves while shooting
images. Hold securely to prevent blurring. Use the ISO sensitivity (High
sensitivity) function/Fix camera shake function when shooting still
pictures and the Fix camera shake function to prevent camera shake
when shooting moving pictures.
The color and brightness of the subject in images shot with the camera
may differ from the actual color and brightness.
Make sure that your fingers, hair and handset strap do not obscure the
camera lens when shooting images.
Because a larger image size requires more data, movement in the image
on the FOMA terminal display may appear slow.
Indoor fluorescent lighting may create flickering or streaky shading on the
screen. This flickering or shading may be reduced by changing the
lighting conditions, brightness or adjusting the camera brightness and
White balance.
Picture Light does not illuminate or flash for shooting when the battery
level is low.
Shot still pictures are saved to the [Camera] folder in My picture of Data box,
and shot moving pictures are saved to the [Camera] folder in i-motion/Movie
of Data box. Data can also be saved to the microSD Card (
n
P. 329).
When activating still pictures shooting, Card reader, Information reader,
Motiondeco, Shotdeco or Cameraloupe, Picture Light illuminates. Picture
Light flashes when activating moving pictures shooting.
To end the camera mode, close the FOMA terminal or press
H
or
c
with the viewfinder display shown in each camera mode.
In each camera mode, if no operations are performed for approximately 2
minutes with the viewfinder display shown, the camera mode
automatically ends and the stand-by display reappears. The camera
mode does not end if there are unsaved data, or when the Submenu,
Shooting settings screen or scan results screen is shown.
Shutter sound, shooting start/end sound, completion sound,
Focus lock sound, and auto timer sound
For still pictures shooting, moving pictures shooting, Card reader,
Information reader, Motiondeco, Shotdeco or Cameraloupe, sounds are
enabled regardless of the FOMA terminal settings.
Before using camera
Precautions for using camera
Performance while using camera
dr20_E.book 198 ページ ２００９年５月１４日 木曜日 午前１０時１７分