Docomo SH-05A, Instruction Manual

Page: 454 / 556

452
e22_dr20_7e.fm
[452/488]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
■ Calling
■ Screen
Calls cannot be made with the dial
Make sure All lock is not set. P. 109
Make sure Keypad dial lock is not set. P. 112
Make sure Self mode is not set. P. 110
Ring tone does not sound
Make sure phone ring volume is not set to [Silent]. P. 87
Make sure Public mode (Drive mode), Manner mode, or Self
mode is not set. P. 66
P. 91
P. 110
Make sure Accept calls/Reject calls, Reject calls by reason of
non-disclosure, Set mute ring time, or Reject unknown is not
set. P. 114
P. 115
P. 116
Make sure ringing time for Voice Mail Service or Call
Forwarding Service is not set to “0 seconds”. P. 390
P. 393
Make sure Answering duration is not set to “0 seconds”. P. 68
Make sure receive time for Auto answer setting is not set to “0
seconds”.
P. 378
Connection cannot be made (Example: [
A
] does not disappear even
after moving to another place, or calls cannot be made/received even
though signal status is not bad)
Turn the power on again, or insert the battery pack or FOMA
card again. P. 40
P. 43
P. 48
Depending on the signal type, even though status is “inside the
service area” or “[
]
] (indicating signal status) appears”,
making/receiving a call may not be available. Move to another
place and call again.
P. 32
Make sure Accept calls/Reject calls is not set. P. 114
In crowded place, heavy telephone/mail traffic may be caused
and makes it difficult to get a connection. In such case, [Please
wait] appears and a busy signal is played. Move to another
place or call again later.
–
Calls cannot be made with 2-touch dialing
Make sure Function lock is not set to the Phonebook. P. 111
Make sure All lock is not set. P. 109
Calls cannot be made from the FOMA terminal with the external
device such as car navigation or hands-free device connected
Call may not connect to the number if making multiple calls in
the condition that the other party does not answer or outside
the service area. In this case, turn off the FOMA terminal power
and restart.
P. 48
Display is dark
Make sure Eco mode (Power saver) is not set in Light/Power
saver setting, or Display light time is not set short in Original
Eco mode.
P. 95
Make sure Normal (auto bright) is not set in Light/Power saver
setting, or [Automatic] is not set for Brightness in Original Eco
mode. Brightness of the display varies depending on the
surrounding light if [Automatic] is set.
P. 95
Make sure setting for Control by scene in Display image quality
is not set to [ON].
P. 102
Make sure brightness adjustment in image quality setting for
1Seg is not set to [Automatic].
P. 227
Make sure VeilView is not set. P. 103
Display is blank
Make sure the FOMA terminal is not turned off. P. 48
Make sure the battery has not run out. P. 47
The display is turned off if the FOMA terminal is not in use for a
set length of time. Change the display time in Screen dsp time
of the Original Eco mode in the Light/Power saver.
P. 96
Make sure Auto power OFF is not set. P. 362
Screen is washed out or patterns appear
Make sure VeilView is not set. P. 103
dr20_E.book 452 ページ ２００９年５月１４日 木曜日 午前１０時１７分