Docomo SH-05A, Instruction Manual

Page: 218 / 556

216
e10_dr20_7e.fm
[216/220]
Cam
era
1
Scan QR code.
:
In the scan results screen, [Image]/[Melody]/[ToruCa] appears
depending on the scanned data.
2
Press
t /
select a usage
/ t
.
:
If [Display] is selected when multiple ToruCa are included, only the
first ToruCa is acquired.
:
When [Save] is selected, images are saved in the [Acquired data]
folder in My picture of Data box, melodies are saved in the [Acquired
data] folder in Melody of Data box, and ToruCa is saved in [ToruCa]
of ToruCa in the Osaifu-Keitai menu.
Shoot printed data such as URLs, mail addresses, phone
numbers and English words, and convert into text to be used by
the FOMA terminal.
Text which can be scanned is shown below. Such as URLs, mail
addresses, phone numbers, English words, etc. are automatically
distinguished based on the text. Double-byte characters such as kanji
and hiragana cannot be scanned.
Text may not be scanned correctly due to scratches, dirt, damage, poor
print quality, lighting conditions or text size.
Data type (URL, mail address, phone number, English word) is
automatically distinguished. Use functions such as scanning text,
connecting to i-mode or Full Browser, composing mail, making voice/
Videophone calls, composing SMS, searching in dictionaries, adding to the
phonebook, and saving bookmarks.
1
In the Custom menu, select
[Camera]
/
[Character reader].
2
Display the text to be scanned in the center of the
frame
〔 〕
on the screen
/ t
.
:
Text near the sides of the frame 〔 〕 may be difficult to scan.
:
Adjust the distance so that the bar on the bottom of the screen turns
a deep blue.
:
Scan up to approximately 60 characters at one time.
:
When multiple lines were scanned: Specify the lines to scan with
u
.
• Text is scanned one line at a time.
3
Press
t
.
:
To edit the scanned result: Press
t
.
: To change the data type of scanned result: Press v .
• When the scanned result is phone number, the data type cannot be
changed.
: To scan again: Press a / [Yes].
4
Press
i /
use scanned results.
:
To connect to the site with a URL (Category: URL): Select [Connect
i-mode]/[Connect FB].
:
To compose a message with a mail address (Category: Mail): Select
[Yes]
/
compose and send a message.
:
To use a phone number (Category: Tel).
• To make a voice call: Press
s
/
t /
[Yes].
• To make a Videophone call: Press
i /
[Yes].
Scanning and using images/ToruCa/melodies
from QR codes
Character Reader (OCR)
Scanning text
URL Single-byte alphabet, single-byte numbers, single-byte
symbols [. - _ : /
E
]
Mail address Single-byte alphabet, single-byte numbers, single-byte
symbols [. @ - _ :]
Phone number Single-byte numbers, single-byte symbols [- + P # * ]
English word Single-byte alphabet, single-byte numbers, single-byte
symbols [- / ? ! @ +
* ’ ( ) , . &]
Using scanned text
dr20_E.book 216 ページ ２００９年５月１４日 木曜日 午前１０時１７分