Docomo SH-05A, Instruction Manual

Page: 57 / 556

55
e03_dr20_7e.fm
[55/74]
Vo
ic
e/Vi
d
eop
ho
ne
C
all
s
1
During a call, press
C /
[Hold Active Call].
:
Alternatively, press
t
during a Videophone call.
2
To resume a call, press
s
.
:
Alternatively, press
C
during a voice call.
:
Press
i
during a Videophone call to resume with a substitute
image.
Switch between a voice call and a Videophone for placed calls.
The Notify switch mode ( n P. 74) must be set to “Activate” for the other
party’s FOMA terminal.
Received calls cannot be switched. Have the other party switch.
1
During a call, press
C /
[Switch to v.phone]/[chg to
voice call]
/
[Yes].
:
Alternatively, press
a
to switch.
:
Switching takes approximately 5 seconds. Switching may take more
time depending on the signal status. [Please wait for a while] appears
and a guidance message is played.
[Picture memo]
When Display setting is set to [Me], this operation is not possible.
The image size is QCIF: 176×144 .
The shot still picture is saved to the [Camera] folder in My picture of
Data box.
The shot still picture cannot be output from the FOMA terminal.
The shutter does not sound.
While still pictures are being shot, your image is sent to the other party
with [Recording] superimposed.
[Visual preference]
When the setting is made during a Videophone call, it is enabled only
for the current call.
Placing calls on hold
<Hold Active Call>
The other party hears the hold tone, and the call is placed on hold. For
Videophone calls, the image set in Hold image is sent to the other party
with [Hold] superimposed.
Calls stay on hold even when the FOMA terminal is closed. Set when
closed does not apply.
Switching a voice/Videophone call
during a call
Calls cannot be switched while 1Seg is being activated.
When switching between a voice call and a Videophone, the call
duration is reset to 0 seconds.
Calls may not be switched from a voice call to a Videophone nor from a
Videophone to a voice call and may be disconnected depending on the
signal status.
Switching time is not included in the talk time and charges are not
incurred.
Switching from a voice call to a Videophone
The other party’s camera image does not appear if the other party
selects to not show image.
When performing packet transmission, disconnect the packet
transmission before switching to Videophone.
If a call is switched to Videophone, hands-free is activated regardless of
the call status before switching.
Calls received with Call Waiting cannot be switched from a voice call to
a Videophone.
Switching from a Videophone to a voice call
Hands-free is disabled.
Switching from a voice call to a Videophone
dr20_E.book 55 ページ ２００９年５月１４日 木曜日 午前１０時１７分