Docomo SH-05A, Instruction Manual

Page: 109 / 556

107
e06_dr20_7e.fm
[107/122]
Security Settings
The PIN1 code is a four- to eight-digit security code that is entered when the
FOMA terminal is turned on or when a FOMA card is inserted to prevent
unauthorized use by a third party. Enter the PIN1 code to enable making/
receiving calls and operating the handset. The PIN2 code is four- to
eight-digit security code that is entered for performing operations such as
resetting total cost or using Client certificates, or applying for.
Use the previously set PIN1 and PIN2 codes when inserting a present
FOMA card into a newly purchased FOMA terminal.
PUK is an eight-digit number used to disable the PIN1/PIN2 code lock. PUK
cannot be changed by the user.
If PUK is incorrectly entered a total of ten times continuously, the FOMA
card is completely locked.
Change the terminal security code (four to eight digits).
1
In the Custom menu, select [Settings]
/
[Security]
/
[Change security code]
/
enter the current terminal
security code
/ t
.
2
Enter the new terminal security code
/ t /
enter the
new terminal security code again
/ t
.
1
In the Custom menu, select [Settings]
/
[Security]
/
[UIM Settings]
/
enter the terminal security code
/
t /
[PIN1 code input set].
2
Select the setting
/ t
.
3
Enter the PIN1 code
/ t
.
■ Entering PIN1 code at power on
Set the PIN1 code input set to [ON], and the PIN1 code entry screen
appears when the power is turned on.
1
In the PIN1 code entry screen, enter the PIN1 code
/
t
.
PUK
• Client certificate operations
• Access a FirstPass
compatible site
Enter the PIN1 code
Contact a docomo Shop
If incorrectly
entered three times
continuously
If incorrectly
entered ten times
continuously
Enter PUK
Security when the power is
turned on
/
/
Enter the PIN2 code
Set a new PIN code
OK
Change security code
Changing terminal security code
UIM Settings
Setting PIN code
Setting handset to require PIN1 code entry at
power on
<PIN1 code input set>
dr20_E.book 107 ページ ２００９年５月１４日 木曜日 午前１０時１７分