Docomo SH-05A, Instruction Manual

Page: 377 / 556

375
e17_dr20_7e.fm
[375/378]
Con
v
en
ie
nt Fu
nc
tio
n
s
Show a stock icon or sound an alarm in stand-by when the set maximum
call cost is exceeded after a call is ended. Also, reset total call cost on the
1st of each month.
1
In the Custom menu, select [Settings]
/
[NW
Services]
/
[Talk time/cost]
/ C /
[Limit settings].
2
Enter the terminal security code
/ t
.
3
Select the [Limit settings] field
/ t /
[Enable].
4
Select the [Limit settings] field
/ t /
enter limit
/ t
.
5
Select the [Notice method] field
/ t /
select the
notification method.
;
Select [Alarm + stand-by]
/
set the alarm tone, alarm volume,
and ring duration
/ i
.
• For details on the setting method
n
steps 3 to 5 of “Setting
alarms” on P. 367
;
Select [Stand-by].
6
Select the [Auto reset] field
/ t /
select the setting
/
t / i
.
:
When set to [ON], the call charges are reset at 00:00 on the 1st of
each month.
7
Enter the PIN2 code
/ t
.
■ Deleting Limit settings message in stand-by
1
In stand-by, press
t /
select the stock icon [
4
]
(charge limit exceeded)
/ t
.
2
Enter the terminal security code
/ t
.
Calculate memories, percentages and consumption tax.
1
In the Custom menu, select [LifeKit]
/
[Calculator].
:
In stand-by: Enter number
/ t /
[Calculator].
2
Calculate.
Key operations for calculator
*1 Press for 1+ seconds to copy calculation contents.
*2 Press twice to show the price without tax.
■ Changing tax rate
1
In the calculator screen, press
s
(for 1+ seconds)
/
enter tax rate (01 to 99)
/ t
.
Setting call cost limit notice
<Limit settings>
When auto-reset is set to [ON], the call charges are also reset if date
and time are changed in Date settings (
n
P. 49) in the following month
or later.
If set Limit notice again when Limit settings message is displayed, the
message is deleted.
When Limit settings message is deleted, the message is not displayed
until All calls cost is reset or Limit settings is set again.
Calculator
Using the FOMA terminal as calculator
Number input
0
to
9
C ・ CE (Delete input
number)
c
Decimal point
*
*1
＋
/
－
switching #
RM (Recall memory)
a
＋
(Add) q
% (Calculate percentage)
i
－
(Subtract) r
TAX (Calculate
consumption tax)
s
*2
×
(Multiply) o
÷
(Divide) p
M+ (Add memory)
C
= (Calculate)
t
CM (Clear memory)
m
When calculating memories, results are retained even after the
calculator is ended.
Numbers after the decimal point are left off when calculating
consumption tax.
dr20_E.book 375 ページ ２００９年５月１４日 木曜日 午前１０時１７分