Docomo SH-05A, Instruction Manual

Page: 545 / 556

28
Manual for PC Connection_DR20.fm
AT+GMM Displays abbreviated FOMA
terminal product name (FOMA
SH05A) in alphanumeric
characters.
*2
―
AT+GMM
o
FOMA SH05A
OK
AT+GMR Displays FOMA terminal
version.
*2
―
AT+GMR
o
Ver1.00
OK
AT+IFC=<n,m> Sets local flow control format
between the PC and FOMA
terminal.*1
DCE by DTE (<n>)
0:
No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
(default setting)
DTE by DCE (<m>)
0:
No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
(default setting)
AT+IFC=2,2
o
OK
AT+WS46? Displays wireless network used to
call. Incoming signals are not
affected.
*2
n=22: FOMA network (fixed value) AT+WS46?
o
22
OK
A/ Performs the preceding executed
command.
*2
―
A/
OK
ATA Performs incoming process for
packet or 64K data if entered
when receiving the data.
*2
Enter “ATA184
o
” (arrival call action for
anonymous call) or “ATA186
o
” (arrival call
action for identified call) while receiving
packets.
RING
ATA
o
CONNECT
ATD Establishes communication. *2, 3 Packet transmission ATD * 99 *** <cid>#
o
When ATD * 99# is entered:
Uses <cid>=1 (default setting) (When
<cid> is not entered, setting becomes
<cid>=1).
When syntax starting with
ATD184
*
99
***
<cid># is entered:
“184” is added to host (APN) defined by
specified <cid> (Alternatively, “186” can be
added by same operation to turn caller ID
sending to ON).
64K data communication ATD [parameter]
[phone number]
o
ATD * 99 *** 1#
o
CONNECT
ATE<n> Sets whether the FOMA terminal
returns echo of AT commands
sent from the PC.
*1
n=0: Does not return echo
n=1: Returns echo (default setting)
Normally, set to n=1. If the PC has an echo
function, set to n=0. ATE1
o
OK
ATH Disconnects line when entered
during packet transmission or 64K
data communication.
*2
―
(During
communication)
+++ (Does not
appear)
OK
ATH
o
NO CARRIER
ATI<n> Displays the verification code. *2 n=0: NTT DoCoMo
n=1: Displays abbreviated product name
(FOMA SH05A)
n=2: Displays the product version in a format
such as “VerX.XX”
n=3: Displays each element of ACMP signals
n=4: Displays details of the communication
functions provided in the FOMA terminal
ATI0
o
NTT DoCoMo
OK
ATO Returns to online data mode from
online command mode during
communication.
*2
―
ATO
o
CONNECT
AT command Overview Parameter/Explanation
Execution
example
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Number cannot be dialed if characters
other than 0 to 9,
* , #, +, A, a, B, b, C, c, D,
d, hyphens (-), spaces, T, t, P, p, !, W, w,
@, or commas (,) are included. Characters
highlighted with
can be entered but
are ignored during dialing.
[M]
[M]
[M]
[M]
Manual for PC Connection_DR20.fm 28 ページ ２００９年５月１４日 木曜日 午前１０時５２分