Docomo SH-05A, Instruction Manual

Page: 234 / 556

232
e11_dr20_7e.fm
[232/238]
1Seg
Perform the following in advance.
Date settings (
n
P. 49)
Channel setting (
n
P. 223)
Confirm disclaimer displayed when using 1Seg for the first time
(
n
P. 222)
Save up to 50 timer settings for starting and recording 1Seg programs.
For precautions on recording video
n
P. 230
The reception status of 1Seg may become bad when the FOMA terminal
is closed. Record the 1Seg program with the FOMA terminal opened.
1
In the Custom menu, select [1Seg]
/
[Timer list]
/
C /
[New].
2
Select [EPG]
/
set a timer.
1
In the Custom menu, select [1Seg]
/
[Timer list]
/
C /
[New].
2
Select [Manual input]
/
select the timer setting.
;
Select [Reception]
/
proceed to step 1 of “Setting timer for
starting 1Seg programs” on P. 232.
;
Select [Recording]
/
proceed to step 1 of “Setting timer for
recording 1Seg programs” on P. 233.
■
Setting timer for starting 1Seg programs
<Reception>
For setting timer for starting 1Seg programs, the operation after an alarm
is sounded (
n
P. 233) can be set with Linked startup setting.
1
Select [Reception]
/
select the [Strt date] field
/ t /
select the [Start] field
/
enter the start date
/
enter a
time (24-hour format)
/ t
.
:
To select a date from the calendar: In the Date settings screen, press
C /
select a date with
w / t
.
2
Select the repeat method.
;
Select [Once only].
; Select [Daily XX:XX]/[Weekly XX] / enter the number of
repeats / t .
• The saved time/day appears.
•
00 represents unlimited repeats.
3
Select the [Channel] field
/ t /
select a channel
/ t
.
4
Select the [Prog name] field
/ t /
enter the program
name
/ t
.
:
Enter up to 200 single-byte (100 double-byte) characters.
5
Select the [Start ann] field
/ t /
[ON].
:
If the start announcement is set to [OFF], the timer for starting
program is not activated.
6
Select [Alarm time]
/
enter the alarm time (number of
minutes before the start time)
/ t
.
7
Select [Alarm tone]
/
select an alarm tone
/ i
.
:
To check an alarm tone: Select an alarm tone
/ t
.
:
To not sound an alarm: Select [Alarm tone]
/
[Not set].
8
Select [Alarm volume]
/
adjust the volume with
u /
t
.
For still pictures, only images are recorded, and the contents of data
broadcasting are not recorded.
When only data broadcasting is displayed according to Display mode
(L), still pictures cannot be recorded.
Timer list
Setting timer for starting or recording
1Seg programs
Setting timer using Program guide i-
a
ppli
<EPG>
Setting date/time and a channel
<Manual input>
Multiple programs cannot be watched/recorded simultaneously. If the
recording period is partially same as that of an existing timer-set
program, the confirmation screen for saving appears. Check the
contents of the message, and then perform registration.
dr20_E.book 232 ページ ２００９年５月１４日 木曜日 午前１０時１７分