Docomo SH-05A, Instruction Manual

Page: 262 / 556

260
e13_dr20_7e.fm
[260/280]
i-
a
pp
li/
i-W
id
g
et
Set the following operating conditions for each software.
Some settings are not available depending on the software.
1
In the software list screen, select software
/ C /
[Set
software use].
2
Select a field to set
/ t
.
3
Select the setting
/ t
.
:
To set other operating conditions continuously: Repeat steps 2 and
3.
4
Press
i
.
Setting operating conditions for i-
a
ppli
<Set software use>
Network set Set whether data can be transmitted while
i-
a
ppli is running.
i- a ppli To Set whether to start i- a ppli with i- a ppli To.
i- a ppli call set When i- a ppli call is received, set whether to
allow to start i- a ppli.
Icon info set Set whether software should be notified
regarding icons indicating unread mail and
Message R/F, battery level, Manner mode
setting and whether the handset is inside or
outside the service area, while i-
a
ppli is running.
To allow ring tone/
image/icon changes
by software Set whether to allow the i- a ppli to change the
ring tone and screen.
To show
confirmation screen
by all changes When [Allow ring tone/image/icon changes by
software] is set to [Yes], set whether to show the
confirmation screen when settings are changed.
To access to
phonebook/call
records by software Set whether to allow the i-
a
ppli to access the
phonebook or Redial/Received calls.
Location usage
setting Set whether to use location information for GPS
compatible i-
a ppli.
[Network set]
Software may not function properly and information may not be
available in a timely manner if Network set is set to [No]. This may also
prevent some software from starting.
Because images used with i-
a
ppli and entered data are sent via the
Internet, some of these information may be viewed by a third party
(“Images used with i-
a
ppli” include images shot using the camera
function operated with i-
a
ppli, images acquired using the Ir
communication function operated with i-
a
ppli, and images viewed and
retrieved from Data box operated with i-
a
ppli).
[i-
a
ppli To]
The software to start is determined by the site, i-mode mail, Message
R/F, screen memo or ToruCa. Download the specified software in
advance.
[i-
a
ppli call set]
i-
a
ppli call setting may not become valid depending on software.
[Icon info set]
The software requires icon information may not function properly if set
to [No].
If Icon information setting is set to [Yes], the icon status for unread mail/
Message R/F, battery level, the Manner mode, and inside/outside the
service area may be sent via the Internet to the IP (Information
Provider) along with “terminal ID and UIM ID”, and this information may
be viewed by a third party.
[Allow access to phone book/call records by software]
Setting this to [No] may prevent operation of some i-
a
ppli.
dr20_E.book 260 ページ ２００９年５月１４日 木曜日 午前１０時１７分