Docomo SH-05A, Instruction Manual

Page: 380 / 556

378
e17_dr20_7e.fm
[378/378]
Con
v
en
ie
nt Fu
nc
tio
n
s
Receive voice/Videophone calls.
1
Connect the Stereo Earphone Set.
2
When a call is received, press the switch for 2+
seconds.
:
Set the location to which the ring tone is output (
n
P. 90).
3
Press the switch for 2+ seconds to finish call.
Automatically answer voice/Videophone calls received while the
Stereo Earphone Set 01 (sold separately), etc. is connected.
When the Stereo Earphone Set is not connected, Auto answer setting is
not available even if set to [ON].
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[Incoming settings]
/
[Auto answer
setting].
2
Select [ON]
/
enter a ring time
/ t
.
Receiving calls with switch
Calls may be answered accidentally if the earphone/microphone with
switch is connected while the ring tone sounds. Disconnect when not in
use.
Auto answer setting
Receiving a call automatically when an
earphone is connected
Calls are answered without ringing or vibrating when the ring time is set
to “0 seconds”.
Calls from other parties set for Reject calls are not answered.
Set different Auto answer setting and Record message ring times.
If both Voice Mail Service and Auto answer setting are enabled, and the
same number of seconds is set for both services, then Voice Mail
Service may take priority. To prioritize Auto answer setting, set a
shorter ring time than that set for the Voice Mail Service (This also
applies to the Call Forwarding Service).
dr20_E.book 378 ページ ２００９年５月１４日 木曜日 午前１０時１７分