Docomo FOMA P701iD, Manual

Page: 561 / 580

559
Appendix/Interfacing
to
External
Devices/Troubleshooting
●
The software update may not start if an alarm is activated.
●
If you execute “Initialize” after completing the reservation (see page 444), the software update does not start even when the reserved
time arrives. Make a reservation for the software update again.
Information
Confirm the date and time you selected. Select “YES”. Your FOMA phone
communicates with the server again and then the reservation is completed.
When the reserved time comes, the display on the right appears and the software update starts
automatically.
Before the reserved time, charge the battery pack full, place the FOMA phone in the Stand-by display in a
place within reach of radio wave. Note that updating may not start even when the reserved time has
arrived if you are using other functions.
●
During a call, All Lock, or PIM Lock, the message to the effect that the software update starts is not
displayed and the software update does not launch. Follow step 1 on page 557 to display the reason for
the failure to launch the software update.
2
●
The server’s time table appears for the software update reservation.
Information
When downloading takes time or the server is busy, you can set in advance the date and time for starting
up the software update by communicating with the server.
Select “Reserve” from the display for selecting update method (<Software Update
display> of page 557).
The date and time which can be reserved are displayed.
1
Reserve Date and Time for Updating Software (Reserve Update)
When you select “Others”.
After communicating with the server, you can select the date and time you want. The availability of each time zone is displayed
on the time selection display.
○:
Available,
△:
Almost full,
×:
Not available
When you select one time zone you want, you can communicate with the server again to display candidates for reserving time.