Docomo FOMA P701iD, Manual

Page: 396 / 580

394
Data
Display/Edit/Management
Inserting/Removing miniSD Memory Card
Open the cover of the
miniSD memory card slot.
1
Face the front surface of
the miniSD memory card
upwards and insert the
memory card.
●
Push it until it clicks.
2
Close the cover of the
miniSD memory card slot.
3
●
Do not insert or remove the miniSD memory card with the FOMA phone turned on. It may damage the miniSD memory card or its
data.
●
Note that miniSD memory card may pop out when you insert or remove it.
●
Confirm the direction of the miniSD memory card, and then insert or remove it straight. (If you obliquely insert the miniSD memory
card into the slot, the memory card may be damaged.)
●
It may take long to initially read or write data after attaching the miniSD memory card.
Information
■
Icons
The following icons appear when you install the miniSD memory card:
: You can save data to the miniSD memory card and read the data you saved.
: You cannot use the miniSD memory card. Remove the miniSD memory card and then install it again.
●
When “ ” is displayed even after you remove the miniSD memory card and insert it again, execute “Check miniSD” or
“miniSD format”.
■
Inserting
■
Removing
Open the cover following step 1 of
“Inserting” and push the miniSD
memory card until it stops.
●
Pushing the miniSD memory card inside pops up
the card.
1
Remove the miniSD
memory card.
2
＊ You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. (See page 393)