Docomo FOMA P701iD, Manual

Page: 483 / 580

481
Data
Transmission
Enter any name in the “
名前
(Name)” field,
then click “OK”.
Here, “Sample” is entered as an example.
4
Select the connection method.
<When you can select the COM port of the “FOMA
P701iD”>
Select the COM port with which you install the “FOMA P701iD” in
the “
接続方法 (Connection method)” field, then click “OK”.
Then, go to step 6.
●
Here, select “COM6” as an example. See page 479 for the COM
port number of the “FOMA P701iD” you should actually select in
the “
接続方法
(Connection method)” field.
5
<When you cannot select the COM port of the
“FOMA P701iD”>
Click “
キャンセル
(Cancel)” to close the “
接続の設定
(Set a
connection)” screen, then perform the following operations:
(1) From the “
ファイル
(File)” menu, select “
プロパティ
(Properties)”.
(2) Select “FOMA P701iD” in the “ 接続方法 (Connection
method)” field of the “
接続の設定
(Set a connection)” tab on
the “Sample
のプロパティ
(Sample Properties)” screen.
(3) Uncheck “ 国 / 地域番号と市外局番を使う (Use country/region
code and area code)”.
(4) Click “OK”.
Then, go to step 7.
Specify an access point name (APN).
Enter an access point name (APN) in the following format:
AT+CGDCONT = cid, "PPP", "APN"
cid: Enter 2 or any number from 4 to 10.
※
If you have already specified cid, be careful that its contents are
overwritten by the access point name you enter here.
"APN": Enclose an access point name (APN) in double quotation
marks (").
"PPP": Enter "PPP" as it is.
(Example: When specifying APN “XXX.abc” in cid2)
AT+CGDCONT=2,"PPP","XXX.abc"
Enter this character string, then press . If “OK” appears, the
APN setting is completed.
●
To confirm the current APN setting, enter “AT+CGDCONT? .”
The set APNs are listed on the screen. (See page 482)
7
The properties of the COM port appear on the
display, then Click “OK”.
●
This display appears when you select a COM port in step 5.
6
Confirm that “OK” appears on the display.
8