Docomo FOMA P701iD, Manual

Page: 326 / 580

324
i-
α
ppli
Function menu
Software desc.
Upgrade
Add desktop icon
Delete
Delete selected
Delete all
Operations
You can display the software name and version of the i-
α
ppli.
●
Use to scroll the display.
You can upgrade the version of the software.
YES
● To cancel, select “NO” and press .
You can paste the selected i-
α
ppli icon to the desktop. (See page 142)
YES
●
A confirmation display appears for the software that has been set as the Stand-by display or set
for Auto Start. Select “YES” and press ; the software program is deleted.
●
To cancel, select “NO” and press .
Put a check mark for the software programs to be deleted ( ) YES
●
“ ” and “ ” switch each time you press . You can check or uncheck all items by pressing
( ) and selecting “Select all/Release all”.
●
If there is the software that has been set as the Stand-by display or set for Auto Start, a confirmation
display appears. Select “YES” and press ; the software programs are deleted.
●
To cancel, select “NO” and press .
Enter your Terminal Security Code YES
●
If there is the software that has been set as the Stand-by display or set for Auto Start, a confirmation
display appears. Select “YES” and press ; all the software programs are deleted.
●
To cancel, select “NO” and press .
●
See page 148 for the Terminal Security Code.
<Software setting (Icon info)>
●
When you set “Software setting (Icon info)” to “ON” for the i-
α
ppli Stand-by display, the icon information for unread mail/message,
battery level, Manner Mode, radio wave strength and being out of area can be sent to the IP (Information Provider) over the Internet in
the same way as the serial number of your mobile phone/UIM, and can be deciphered by third parties.
●
When the software needs “Software setting (Icon info)”, the software might not run if “OFF” is selected.
<Software desc.>
●
You cannot change the name of the i-
α
ppli software displayed in “Software desc.”.
<Upgrade>
●
When the software has been updated at launching, you can automatically update that software.
● When there is not enough memory, the confirmation display appears asking whether to delete unnecessary software programs and
save new ones. (See page 318)
●
At upgrading, the confirmation display might appear asking whether to send the “serial number of your mobile phone/UIM”.
Select “YES” and press to start updating. In this case, the “serial number of your mobile phone/UIM” is sent to the IP
(Information Provider) over the Internet, so could be deciphered by third parties. However, your phone number, address, age, and
gender are not notified to the IP (Information Provider) or others by this operation.
To cancel, select “NO” and press .
●
You cannot update the mail-linked i-
α
ppli in the following cases:
・
While details of the corresponding i-
α
ppli mail folder are displayed
・
While Mail Security is set
・
While security is set for the corresponding i-
α
ppli mail folder
Information