Docomo FOMA P701iD, Manual

Page: 162 / 580

160
Safety
Settings
Function menu
Check settings
Release
Operations
Go to step 2 on page 159.
YES
●
To cancel, select “NO” and press .
<Example>
If you release the settings from the display in step 1 on page 159, all the Phonebook entries set with
“Restrict dialing” are released.
●
You cannot check or release while another function is working.
Information
Restrictions display ( ) Do the following operations.
1
Function Menu of the Restrictions Display
<Call Setting w/o ID>
Setting Response to Incoming Calls without Caller ID
You can set whether to receive (accept) or not to receive (reject) the
call depending on the reason for no caller ID. There are three reasons;
“Not supported”, “Payphone”, and “User unset”.
Lock/Security Call setting w/o ID Enter your Terminal Security Code
Not supported ············Calls from the other party who cannot notify his/her caller ID such as calls from overseas or from
ordinary phones via call forwarding services.
(Depending on the telephone companies the calls go through, however, his/her caller ID may be
notified.)
Payphone····················Calls from payphones, etc.
User unset ··················Calls from the other party who has set his/her caller ID not to be notified.
●
See page 148 for the Terminal Security Code.
1
Setting at purchase
Not supported······Accept : Same as ring tone
Payphone ············Accept : Same as ring tone
User unset···········Accept : Same as ring tone
Accept or Reject
●
If you select “Accept”, go to step 3 on page 119 to select a ring tone or i-motion movie. If you select “Same as ring tone”, the
ring tone will be the one selected in “Phone” of “Select ring tone”. If you do not change the ring tone according to whether a
caller ID is notified or not, select “Same as ring tone”.
2
●
If you select “Reject”, the ring tone does not sound even if a call comes in, the call is stored in “Missed calls” of “Received calls” and
the icon of “Missed call” appears on the Stand-by display. Also, the caller hears a busy tone even if you have set Voice Mail Service
or Call Forwarding Service to “Activate”. However, if you set the ringing time for Voice Mail Service or Call Forwarding Service to 0
seconds, or when the FOMA phone is out of the service area, or when the power is turned off, the busy tone will not be played,
activating Voice Mail Service or Call Forwarding Service. Note that in this case the record is not stored in “Received calls”, and the
“Missed call” icon does not appear on the Stand-by display.
●
You can receive SMS messages or i-mode mail regardless of this setting.
Information