Docomo FOMA P701iD, Manual

Page: 337 / 580

335
i-
α
ppli
<i-
α
ppli Stand-by Display>
Operating i-
α
ppli Stand-by Display
Software Setting (Stand-by Setting)
You can set i-
α
ppli for the Stand-by display. Once set, the i-
α
ppli Stand-by display automatically appears
each time you bring up the Stand-by display.
Software List ( ) Software setting
1
■
When a software program is set for the i-
α
ppli Stand-by display
“ ” appears on the Software List, and “ ” or “ ” is displayed at the bottom of the display while the i-
α
ppli Stand-by display is
running.
■ To operate i-
α
ppli as a normal i-
α
ppli when an i-
α
ppli Stand-by display is running
From the i-
α
ppli Stand-by display, press .
“ ” or “ ” changes to a blinking “ ” or “ ” and then you can operate the i-
α
ppli normally.
● You can return to the i-
α
ppli Stand-by display by pressing and holding for at least one second or by
pressing , selecting “Ended” and pressing . To cancel the i-
α
ppli Stand-by display, select
“Terminated”, press , select “YES” and then press .
Stand-by set
ON··············Sets the i-
α
ppli Stand-by display.
OFF············Cancels the i-
α
ppli Stand-by display.
2
Press ( ).
3
●
With some software programs set as the i-
α
ppli Stand-by display, you can press a key to go from the normal i-
α
ppli status to the
i-
α
ppli Stand-by display status. However, you cannot return to the i-
α
ppli Stand-by display if another menu function is operating.
Information
●
When “Ticker ON/OFF” is set to “ON”, you cannot set i-
α
ppli programs for the Stand-by display.
●
If you turn off the FOMA phone while the i-
α
ppli Stand-by display is running, the confirmation display appears asking whether to
activate the i-
α
ppli Stand-by display when you turn on the power again. Select “YES” or “NO” and press .
●
You can set only one software program for the i-
α
ppli Stand-by display.
● Some i-
α
ppli cannot be set for the Stand-by display.
●
Note that you might not be able to receive timely information if you have set “Software setting (Stand-by net)” to “OFF”.
●
If the software which connects to the network is set for the i-
α
ppli Stand-by display, it might not operate successfully because of radio
wave conditions.
●
When the i-
α
ppli Stand-by display is activated, the image set for “Stand-by display” of “Display setting” will not be displayed.
● When you bring up the Stand-by display while a menu function is operating, the image set for “Stand-by display” of “Display setting”
will be displayed, even when the i-
α
ppli Stand-by display is set.
●
You cannot use the Web To function from the i-
α
ppli Stand-by display.
●
If you set All Lock or PIM Lock when the i-
α
ppli Stand-by display is running, the i-
α
ppli Stand-by display will end. If you set All Lock,
the image set for “Stand-by display” of “Display setting” will be displayed and when you set PIM Lock, the default Stand-by display will
be displayed. The i-
α
ppli Stand-by display will return when you release All Lock or PIM Lock.
Information