Docomo FOMA P701iD, Manual

Page: 438 / 580

436
Other
Useful
Functions
<Reset Call Duration>
Resetting Call Duration/Call Charge
You can reset Last Call Duration and Total Calls Duration to “0 s”.
Call time/cost Reset call duration Enter your Terminal Security Code
Reset call duration YES
●
See page 148 for the Terminal Security Code.
● To cancel, select “NO” and press .
1
Resetting Call Duration
You can reset Last Call Cost and Total Calls to “
￥
0”.
Call time/cost Reset call duration Enter your Terminal Security Code
Reset call charge YES
●
See page 148 for the Terminal Security Code.
●
To cancel, select “NO” and press .
1
Resetting Call Charge
Enter your PIN2 code
●
See page 148 for PIN2 code.
2
●
When the date and time are not set, or if “Reset Call Duration” has not been done after setting the date and time, the date and time of
Calls Reset and Cost Reset are not displayed.
●
When Last Call Duration exceeds “19 hours 59 minutes 59 seconds”, or Total Calls Duration exceeds “199 hours 59 minutes 59
seconds”, “0 s” returns to re-count the time.
●
The total calls duration for video-phone calls is the digital transmission, so it is displayed in “Digital” not in “Talk”.
● If you switch between the voice call and video-phone call during a call, the call duration and call charge are counted respectively for
the calls. You are not charged while “Changing” (see pages 57 and 82) is displayed.
●
The duration/charge for i-mode transmission and packet transmission is not counted. For how to check i-mode bill, refer to “i-mode
User’s Manual” which is supplied on your i-mode contract.
●
The duration for ringing and calling is not counted as call duration.
●
If you turn off the power or remove the UIM, Last Call Duration is reset to “0 s”; and Last Call Cost is reset to “
￥＊＊
”.
Information
You can set the call cost limit and can be notified when it is
exceeded. If you set “Auto reset setting” to “ON”, the call
cost is reset at midnight on the 1st of the month and “
” is
deleted. To use Auto reset, set the date and time by “Set
time” beforehand.
Call time/cost Notice call cost Enter your Terminal Security Code
ON··············Validates Notice Call Cost.
OFF············Invalidates Notice Call Cost. The setting is completed.
●
See page 148 for the Terminal Security Code.
1
<Notice Call Cost>
Setting Call Cost Limit
Setting at purchase
Notice call cost ······OFF
Max cost ················
￥
3,000 (When “Notice call cost” is set to “ON”)
Method to alert·······Icon (When “Notice call cost” is set to “ON”)
Auto reset setting···OFF (When “Notice call cost” is set to “ON”)
Enter a maximum cost
You can set from ￥ 10 through ￥ 100,000 in unit of ￥ 10.
●
If you do not change the Max cost, just press without entering the maximum cost.
2