Docomo FOMA P701iD, Manual

Page: 191 / 580

189
Camera
Function menu
Edit title
Result
Delete this
Delete all
Operations
Enter a title
●
You can enter up to 9 full-pitch or 18 half-pitch characters.
You can bring up the result display of scanned code for the stored data.
YES
●
To cancel, select “NO” and press .
Enter your Terminal Security Code YES
●
To cancel, select “NO” and press .
●
See page 148 for the Terminal Security Code.
<Text Reader>
Using Text Reader
You can scan printed phone numbers, mail addresses or alphanumeric such as URLs using the outside
camera, and store them as text information. Use the text information to make calls, compose i-mode mail,
or connect to the Internet.
■
When scanning with Text Reader
• Slide the close-up lever to “ ” and start scanning. (See page 178)
• Scan characters with the camera about 7 cm away from them.
The scanning rate is lowered if you scan text off the position about 7 cm.
• Scan so that the camera is in parallel with the characters.
• Scan so that the characters will be in the scanning range.
• After scanning, slide the close-up lever back to “ ”.
Scanning range
You can store eight scanned data items of up to 256 half-pitch characters per item. The number of
characters you can scan at a time is up to 50 half-pitch characters. Split a lengthy text for scanning.
Text reader Scan text
●
You can bring up the display on the right also by selecting from the Shortcut menu and pressing .
●
You can bring up the display on the right also by selecting “Text reader” of “CHG camera-mode” from
the Function menu and pressing .
●
When eight codes have already been stored, the confirmation display appears asking whether to
overwrite the oldest code. To overwrite, select “YES” and press .
To cancel, select “NO” and press .
1
Scanning Text
At Text Reader start-up
Photo light ·······OFF
<Text Reader Selection display>
Bar Code Reader List ( ) Do the following operations.
1
Function Menu of the Bar Code Reader List
<Bar Code Reader List>
Switch to the close-up mode and fit the characters to be scanned to
the scanning range and display them.
●
Press ( /
)
to set the photo light to “ON” or “OFF”.
2
<Scanning Text display>