Docomo FOMA P701iD, Manual

Page: 492 / 580

490
Data
Transmission
The operation below explains how to disconnect, giving
Windows
® XP as an example.
Click “
切断
(Disconnect)”.
2
Dial-up icon
Disconnecting
● Displays may differ depending on the personal computer you use.
●
The transmission line may not be disconnected by only exiting the
browser software. To surely disconnect the transmission line, perform
this operation.
●
The baud rate displayed on your personal computer may be different
from the actual one.
Information
If this error occurs Take the action below
If you cannot connect to network (if you fail a dial-up
connection), confirm the following items:
Your personal
computer cannot
recognize
“FOMA P701iD”
You cannot
connect to the
access point
・
Confirm whether your personal computer satisfies
the operating environment (see page 460).
・ Confirm whether the P701iD transmission setup file
is installed in your personal computer.
・
Confirm whether the FOMA phone is connected to
your personal computer and powered on.
・ Confirm whether the FOMA USB Cable (option) is
securely connected to the FOMA phone and your
personal computer.
・
Confirm whether the ID (user name) and password
are correct.
・
When you need to notify the access point of your
caller ID such as when using mopera U or mopera,
make sure “184” is not prefixed to the phone
number.
・
Confirm that “
フロー制御を使う
(Use the flow
control)” is checked in the modem properties.
・
If you cannot connect to the access point even after
confirming above, consult your Internet service
provider or network administrator about the setting
method.
When You cannot Connect to Network
Double-click the dial-up icon on the
task tray.
1
“
スタート
(Start)” “
すべてのプログラム
(All
programs)” “
アクセサリ
(Accessories)”
“
通信
(Transmissions)” Open “
ネットワー
ク接続
(Network connection)”
1
Open the access point name to be used.
Select the icon of the ISP name (see page 483) you specify in
“Setting Dial-up Network”, then select “
ネットワークタスク
(Network task)”
→
“
この接続を開始する
(Start this connection)”.
Otherwise, double-click the icon of the access point name.
2
Confirm the contents and click “
ダイヤル
(Dial)”.
● When connecting to mopera U or mopera, you can leave the
user name and password fields blank.
3
The display appears to indicate the
connecting state.
During this time, the system performs logon processing to confirm
the user name and password.
After the connection is completed, a pop-up message “
（接続名）に
接続しました
[Connected to (access point name)]” appears from
the indicator of the task bar.
4
For Windows ® XP
The connection is completed.
After the connection is completed, the message below appears
from the indicator of the task bar for a few seconds.
●
You can start the browser software to browse web pages, use
e-mail and so on.
●
If this message does not appear, confirm the setting of the
access point name again.
5
●
Use only the FOMA phone set with the dial-up setting for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the transmission setup files.
●
The FOMA phone does not support Remote Wakeup.
●
The power consumption of the FOMA phone increases during
transmission.
●
During packet transmission, the following icons appear according to
the transmission state:
“ ” (Transmitting, data sending)
“ ” (Transmitting, data receiving)
“ ” (Transmitting, no data sending/receiving)
“ ” (Outgoing or disconnecting)
“ ” (Incoming or disconnecting)
Information